Gas Appliance Installation Service

Plumbers Oak Park

Whether you’re switching out an old appliance or adding one to your home, gas pipe sizing and installation will need to happen. Unless you have experience with plumbing and connections, it’s best to leave this work to the pros. Oak Park Plumbing Services know what kind of pipes to use and how to install them safely.



It can be a challenge to find reputable gas appliance plumbers, but look no further, we not only deliver our plumbing work to Oak Park, but we have extended our plumbing servicing to: Pascoe Vale; Pascoe Vale South; Hatfield; Fawkner; Glenroy; Gowanbrae; Tullamarine; Coburg; Coburg North; Fitzroy; Brunswick; Brunswick East; Brunswick West and Melbourne’s North West Metro Region.   


Call Us now! Ph: 9118 0682

Image depicts a single gas burner alight on the stove. The flame appears to be on high and is the colour blue.
estimated_quoteArtboard 3

Get My FREE Quote Now!

Contact Us

Use Oak Park Plumbing Service

For All Your Gas Appliance Needs!

Call Now ph: 9118 0682

Gas Appliance Pipe Lengths

When you install a gas appliance, you will need to consider the pipe lengths. This is important as it will determine the efficiency of your gas system and the safety of the appliances you are installing. You will also need to make sure that your gas pipes are sized correctly to meet the pressure and flow requirements. This can be done by using a sizing chart or sizing equation.


Generally, the best type of pipe for installing gas appliances is steel pipe. It is durable and will withstand high pressure. It is also available in a variety of lengths and diameters to accommodate different applications. It is a cost-effective option and is a good choice for underground piping systems. Corrugated stainless steel tubing is also a popular option for installing a gas appliance as it can bend around corners and reduce the number of joints and fittings required. It is also more lightweight than steel pipe and easier to work with.


Image depicts a kitchen stove gas top being installed by a gas plumber. The light-coloured bench to is complimented by white subway tiles as splash back. The plumber is kneeling down in front of the gas cook top using a tool to fix the gas pipe to the stove. He is wearing a blue cap and orange gloves.

Gas Appliance Fittings

Whether you’re installing gas appliances or replacing old ones, fittings are an important part of the job. They provide support, protect the pipe from damage and help to keep you safe. Press-fit fittings are a great option for gas installation because they’re easy to use and create leak-free connections.


You just need to source the appropriate pipe sizes and a crimping tool. Inspect the threads on all your fittings before screwing them in. If you don’t, they can leak. Flared Fittings are another type of fitting that requires a sealant. However, unlike NPT fittings, this seal isn’t created by compression in the threads. When it comes to flared fittings, you should always apply yellow Teflon tape to the threads before screwing them in. This will prevent the threads from leaking and will also make it easier to get a good seal when screwing in your pipes.


Image depicts two copper pipes running vertically, which appear to be attached to a hot water system. There is a left human hand touching the pipe as if to tighten a copper nut.

Gas Appliance Pipe Lengths

Gas Valves

Gas appliances are a great option for home heating and cooling. They are also cheaper to operate than electric devices. Each gas appliance in your home should have its own service shutoff valve. These are typically located within six feet of the appliance and allow you to turn off the gas without cutting off the supply to the entire house.


The main gas shutoff valve is usually located just outside of the home near the natural gas meter. It should have been installed by the gas company when your home was built or updated over the years. Look for a device with a rectangular handle in the street or sidewalk outside your home. This is called a house-side valve and contact Oak Park Plumbing Services since this should be operated only by a licensed professional.


Image depicts a kitchen stove gas top being installed by a gas plumber. The light-coloured bench to is complimented by white subway tiles as splash back. The plumber is kneeling down in front of the gas cook top using a tool to fix the gas pipe to the stove. He is wearing a blue cap and orange gloves.

Gas Appliance Fittings

Gas Appliance Inspections

The installation of gas appliances is a highly technical job, which requires training and expertise. If you don't have the qualifications to do it correctly, you could be putting your home and family at risk. It is recommended that you hire Oak Park Plumbing Services, a licensed plumber, to do your gas appliance installation.



They will know how to properly install the pipe, ensure that it is leak-proof and that all connections are made in accordance with city codes. Any property that uses gas for heating, cooking, or water heaters will need to undergo periodic inspections to ensure that everything is working as it should. These inspections will help you diagnose potential problems with the gas lines and prepare for any necessary repairs. This will also keep your property safe and efficient.


Image depicts two copper pipes running vertically, which appear to be attached to a hot water system. There is a left human hand touching the pipe as if to tighten a copper nut.

FAQs

  • Can In install a gas cooktop myself?

    In general the act of connecting gas to a stove or heater is relatively easy. However, with the ever increasing regulations around gas, it is in your best interests and your families best interest to have a licencnced and experienced plumber undertake the task. That way you can rest knowing everything is done correclty and will pass all inspections. 


    1. Simply call us on 9118 0682 and speak to a member of our team. 


    2. Go to www.plumbingserviceoakpark.com and fill out the request for quote form


    If we are unable to take your call straight away, please a clear message with your contact details and a brief comment about your enquiry and we will get back to you as soon as we can. We may simply have our hands down a blocked drain.


    Because we are a locally owned and operated business, we don’t have a receptionist or call centre, you will speak directly to our plumbers.


  • How long does it take to install a gas cooker?

    Depending on the circumstances, for example a new build or replacement, installation times may vary. But typically, most gas applainces can be installed and set between one-two hours. 

  • How much clearance does a gas cooktop need?

    Typically the clearance for gass cooktops and rangehoods is approximately 600mm. However, according to the Victorian Building Authority (VBA), where the gas cooking appliance and rangehoods have different specifications the large distance should be used. 

  • Can you put draws under a gas cooktop?

    Depending on the design, a draw could be installed under an electric cooktop.

  • How much does it cost to instal a gas cook top?

    Prices differ depedning on the fit out and circumstances surrrounding your appliances. Speak with Oak Park Plumbing today to get your quote.